|
|
|
|
|
€ 5.00
|
|
|
€ 5.00
|
|
|
€ 5.00
|
|
|
€ 5.00
|
|
|
the E textile AUTOMOTIVE
what is special about htis one?
well here deu for iso certifiation in the automotive industry we use not a basis of cotton or not even a basis of polyamide
but a basis of polypropylene
the reason is that polyprop does work on a complete differend level of chemestry then polyamide
one could almost say that polyamide is " natural" (and i biut it for a reason between brackets , it is pure NON natural ofcourse )
and works so much smoother in terms of coloring and aftertreating
but that is not wha tis wanted in automotive industry
no
we look to more deeper propertys
of fireretarding addetives
color fastnes reasons
structural cohesion on longer terms
durabilety
martindale testing reasons
conductivety or lack of it
etcetc
there are a thousand and one reasons to change this for the automotive industry
we give no more detaisl as that is pure R&D work you can do yourself
but again
i mention it so often
there are very very good reasons to have all differend types of materials mixed into the basis of the metal fibers
adn they are not just a fondness of this or that
no they are real and scientifique
so here we introduce to you the automotive special
€ 12.50
|
|
|
the E-textile heavy metal special
this is again one of those very rare to produce ones
here you have a very high % of metal fibres into the bases material
intimitly mixed for heaving all over a 40/60% mix
i can not stress you enough
that the higher % does not automaticly result in better connections
no
it is all in the how you connect
how you make the pathways
how you construct the pathways into the original textile intended strcuture
etc
there are alwys a lot of varibales to take into the equasion
most only keep focusing on this type of thread and do not go that extra mile of thinking
please think your projects through and be thouroughly
go that extra mile whit your brain
even if it is a blond barbie or ken brain try and keep trying please
do it for mama and papa ..
the 40/60 heavy metal is slightly more stressfull on your sewing knitting embroidery etc machines
so be aware to change your sewing needles quite often on your machien when using htis
we recomend on every 100 meters of used thread to change the needles and even in very heavy usage to change your guidance systems
if they are not in special ceramics for heavy metaland corosive materials
every 1000 a 1500 meters
it will make a difference into the final results
and i know
many do not do this and wille ven say that you do not need to do it
well they are plain out right "not smart" (lets be diplomatique and not say styupid ones...)
if sewing needles were that industrictable.... then they would be sold per 1
and not in packs of 2 or 5..... i do not have stocks in sewing needles factorys... so i am not bias to what i say
change often
even if you think it is still ok
they do not cast a lot to buy
personaly i mostly will prefer the quilting types
they are a bit more gentile o the threads
but that last bit of advice is personal liek i prefer vanilla to chocolate and strawberry...
so
we introduce you proudly the heavy metal
becasue there is alot more metal inside 40% even
€ 9.50
|
|
|
this SUPER SOFT KNIT type
is used for the very flexibel joints
there were you can not put a to much of a less flexibel type of thread you wil use this in place
because the Inox steel fibers are 100% intimitly mixed into the cotton you have a super even mix
and therfore a ALWAYS E-Textile worthy connection
we produce it in several thicknesses
from the one ply towards the 5 ply
for now on the webshop
1 ply NeB 31
later this year these wil come to
2 ply NeB 15
5 ply NeB 6
and on demand we can do a lot of other thicknesses
from chainette structures to gimped versions
or in combo with filaments of every tipe possibel
€ 7.50
|
|
|
this SUPER SOFT KNIT type
is used for the very flexibel joints
there were you can not put a to much of a less flexibel type of thread you wil use this in place
because the Inox steel fibers are 100% intimitly mixed into the cotton you have a super even mix
and therfore a ALWAYS E-Textile worthy connection
we produce it in several thicknesses
from the one ply towards the 5 ply
for now on the webshop
1 ply NeB 31
later this year these wil come to
2 ply NeB 15
5 ply NeB 6
and on demand we can do a lot of other thicknesses
from chainette structures to gimped versions
or in combo with filaments of every tipe possibel
€ 9.50
|
|
|
E-TEXTILE CORDONNET
this time we used th polyesther version but we use on demand for bigger volumes all differend types of fibers
(on demand maens 75 kilo and upards per type you want us to produce for you, in any color possible even)
this is the cordonnet type of the sew version
if you need a more bigger connection unit this is what you want to use becasue you have 3 times more material in a section
this been said never ever make th fault and BIG mistake to overkill your work
most always looking ofr thicker and thicker threads for doing their works
it is not alwys in thicker that you will get more and better connections
the way you sew your pathway into textile is also very very very important to obtain a result
so please i do realy mean htis finer is sometimes better
becasue wiht finer you can do a lot more
all depends on the workload on the textile
the martindale tests needed for the endresult
if you work on a miletary or esa nasa thingh your constraints will be a lot differend then wha tyou woudl hvae for making
an etextiel for your uncle the butcher on the corner of the street
what does not say that your uncle is less strickt but.... you get the moint i hope
if you do start asking yourself the question what your uncle does eed to do here then i sugest strongly you get het hell out of here and tart growing tomatoes in your garden....
is used for the very flexibel joints
there were you can not put a to much of a less flexibel type of thread you wil use this in place
because the Inox steel fibers are 100% intimitly mixed into the cotton you have a super even mix
and therfore a ALWAYS E-Textile worthy connection
and on demand we can do a lot of other thicknesses
from chainette structures to gimped versions
or in combo with filaments of every tipe possibel
ideal for embroidering soft feeling soft touch E-textile connections
ideal for sewing thread wich will not go for a total loss and breakdown of you precious household type sewing machine
etc
etc
be creative ......
€ 12.50
|
|
|
E-TEXTILE SINGLE SPUN MULTI USE
what can we tell you of this one
this is a basis we use for making a lot of other inovative materials
this one can be used for very very successfull component in other more complex threads to be made
if is it is in multifolding, gimping, tricotin system with jac complex structures,
assembling components into 3D electric soft pathways etc
it is a pure basis element we use for all of those and even more
etc
etc
be creative ......
€ 9.50
|
|
|
E-TEXTILE 7,5 Nm fat 2 ply
again same remarks as on the cordonnet yarn are here aswell in account
the composition is a bit differend here
10% inox fibers
90% polyeshter fibers super strong composit spun
this time we used th polyesther version but we use on demand for bigger volumes all differend types of fibers
(on demand maens 75 kilo and upards per type you want us to produce for you, in any color possible even)
this is the cordonnet type of the sew version
if you need a more bigger connection unit this is what you want to use becasue you have 3 times more material in a section
this been said never ever make th fault and BIG mistake to overkill your work
most always looking ofr thicker and thicker threads for doing their works
it is not alwys in thicker that you will get more and better connections
the way you sew your pathway into textile is also very very very important to obtain a result
so please i do realy mean htis finer is sometimes better
becasue wiht finer you can do a lot more
all depends on the workload on the textile
the martindale tests needed for the endresult
if you work on a miletary or esa nasa thingh your constraints will be a lot differend then wha tyou woudl hvae for making
an etextiel for your uncle the butcher on the corner of the street
what does not say that your uncle is less strickt but.... you get the moint i hope
if you do start asking yourself the question what your uncle does eed to do here then i sugest strongly you get het hell out of here and tart growing tomatoes in your garden....
is used for the very flexibel joints
there were you can not put a to much of a less flexibel type of thread you wil use this in place
because the Inox steel fibers are 100% intimitly mixed into the cotton you have a super even mix
and therfore a ALWAYS E-Textile worthy connection
and on demand we can do a lot of other thicknesses
from chainette structures to gimped versions
or in combo with filaments of every tipe possibel
ideal for embroidering soft feeling soft touch E-textile connections
ideal for sewing thread wich will not go for a total loss and breakdown of you precious household type sewing machine
etc
etc
be creative ......
€ 15.00
|
|
|
€ 15.00
|
|
|
MerinoX
80% Merino Wool
20% Ultra Extra fine Micro Steel fibers
20 times finer then human fine hair
very special usage purposses
to felt electro pathways into any kind of felt
the wool wil normaly felt after quite a harder felting process
there are soem DONE DO!!!
never ever use chloride components into and onto your felting proces or near your MerinoX
because you wil be able to end up with rost effects
it is not because this is a bad Inox steel fiber. no way this it the best of the best in metalugry production possible
but it is because you get a chemical reaction of chloride components and steel
the rostfree effect wil be cannceled by its reversing of the surface tension of the steel
so again simply said do NOT USE any chloride saops or detergetns to wash to felt or the even cme near the MerinoX
second DO NOT DO or in this case BE VERY VERY CARFUL IN THE WAY YOU DO IT
if you will needle punch the MerinoX into and other kind of felt or fabric be very careful for your machine
do not forget that steel can brake your machine very easely
a thicker padding of the MerinoX can act like a steel ish plate and so
your punshing needles and even the machien can go byby for ever....
furthermore
there is no restriction on the how or what
we do nto give any detaisl concerning Ohm and conductivety or electro transfering etc
because it all changes in the way you will use this MerinoX
the one thing we can say is that it is very good as to spin it for making your own Etextile thread
do nto forget
this is the ultimat best of the best
€ 15.00
|
|
|
€ 5.00
|
|
|
€ 5.00
|
|
|
€ 5.00
|
|
|
€ 5.00
|
